cph6020 no. a1548-1/6 features ? low-noise use : nf=1.2db typ (f=1ghz) ? high cut-off frequency : f t =16ghz typ (v ce =5v) ? high gain : | s21e | 2 =13.5db typ (f=1ghz) speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to- base voltage v cbo 15 v collector-to-emitter voltage v ceo 8v emitter-to-base voltage v ebo 2v collector current i c 150 ma collector dissipation p c when mounted on ceramic substrate (250mm 2 0.8mm) 700 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7018a-002 ordering number : ena1548a 62712 tkim/91609ab tkim tc-00002073 sanyo semiconductors data sheet cph6020 npn epitaxial planar silicon transistor high-frequency low-noise ampli er http:// semicon.sanyo.com/en/network product & package information ? package : cph6 ? jeita, jedec : sc-74, sot-26, sot-457 ? minimum packing quantity : 3,000 pcs./reel packing type: tl marking electrical connection 1, 2, 5, 6 4 3 gt lot no. tl 1 : collector 2 : collector 3 : base 4 : emitter 5 : collector 6 : collector sanyo : cph6 3 2 1 64 5 2.9 0.05 0.4 2.8 1.6 0.2 0.6 0.6 0.9 0.2 0.15 0.95 cph6020-tl-e
cph6020 no. a1548-2/6 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb = 5v , i e =0a 1.0 a emitter cutoff current i ebo v eb = 1 v, i c =0a 1.0 a dc current gain h fe v ce =5v, i c =50ma 60 150 gain-bandwidth product f t v ce =5v, i c =50ma 13 16 ghz forward transfer gain | s21e | 2 v ce =5v, i c =50ma, f=1ghz 10 13.5 db noise figure nf v ce =1v, i c =10ma, f=1ghz 1.2 1.8 db notre) pay attention to handling since it is liable to be affected by static electricity due to the high-frequency process adop ted. ordering information device package shipping memo cph6020-tl-e cph6 3,000pcs./reel pb free collector-to-base voltage, v cb -- v cre -- v cb reverse transfer capacitance, cre -- pf collector current, i c -- ma h fe -- i c dc current gain, h fe collector-to-emitter voltage, v ce -- v collector current, i c -- ma base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- ma i c -- v ce it14950 0 0.2 0.4 0.6 0.8 1.0 1.2 it14951 it14952 08 46 2 0 20 40 60 140 80 100 120 0 30 60 90 150 120 v ce =1v 5v i b =0ma 0.3ma 0.6ma 0.9ma 1.2ma 1.5ma 2 3 3 5 7 100 3 257 3 2 1.0 10 3 257 100 7 2 5 5 3 1.0 3 25 10 0.1 73 257 1.0 f=1mhz it14953 v ce =5v 1v
cph6020 no. a1548-3/6 collector current, i c -- ma nf -- i c noise figure, nf -- db ambient temperature, ta -- c p c -- ta collector dissipation, p c -- mw collector current, i c -- ma | s21e | 2 -- i c forward transfer gain, | s21e | 2 -- db collector current, i c -- ma f t -- i c gain-bandwidth product, f t -- ghz collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf it14958 16 14 12 10 8 6 4 2 10 3 257 100 3 257 23 1.0 it14956 it14955 7 2 3 5 7 7 5 10 1.0 1.0 3 2 23 57 10 23 57 100 it14957 1.0 27 35 10 27 35 100 0 1 2 3 4 v ce =1v 5v f=1ghz 7 2 2 5 3 1.0 3 25 10 0.1 73 257 1.0 f=1mhz it14954 v ce =5v f=1ghz v ce =5v f=1ghz 0 0 20 40 60 80 100 120 140 160 700 600 800 500 300 400 200 100 when mounted on ceramic substrate (250mm 2 0.8mm)
cph6020 no. a1548-4/6 embossed taping speci cation cph6020-tl-e
cph6020 no. a1548-5/6 outline drawing land pattern example cph6020-tl-e mass (g) unit 0.015 * for reference mm unit: mm 0.6 2.4 1.4 0.95 0.95
cph6020 ps no. a1548-6/6 this catalog provides information as of june, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
